FixVault
Home › Nissan-Datsun › 2015 › Versa Note SL › Repair and Diagnosis › Body & Frame › Door Locks › Security Control System (With Intelligent Key) › DTC/Circuit Diagnosis › DTC B26F4: Starter Control Relay › DTC Logic › DTC Detection Logic

DTC Detection Logic

NOTE:
  • If DTC B26F4 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .
  • If DTC B26F4 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC LOGIC .
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B26F4 START CONT RLY OFF BCM requests IPDM E/R to turn starter control relay ON, but BCM cannot receive starter control relay ON state signal from IPDM E/R (CAN).
  • Harness or connectors

    (The CAN communication line is open or shorted.)

  • IPDM E/R
About FixVault