Component Inspection
WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK ANTI-THEFT HORN RELAY
- Turn ignition switch OFF.
- Disconnect anti-theft horn relay.
- Check voltage between anti-theft horn relay terminal and ground under the following conditions:
(+) (-) Condition Voltage (V)
(Approx.)anti-theft horn relay Terminal 3 Ground 12 V direct current supply between terminals 1 and 2 12 No current supply 0 Is the inspection result normal?
YES
Inspection End.
NO
Replace anti-theft horn relay.