DTC Detection Logic

WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

DTC No.	CONSULT screen terms (Trouble diagnosis content)	DTC detection condition
C1A13	STOP LAMP RLY FIX (Stop lamp relay fix)	Diagnosis condition	When Ignition switch is ON.
		Signal (terminal)	-
		Threshold	Stop lamp inactive state continues for 0.3 seconds or more despite the outputting of an ICC sensor ICC brake hold relay drive signal The stop lamp remains ON for 60 seconds or more under the following conditions: Driving at 40 km/h (25 MPH) or more No stop lamp drive signal output from ADAS control unit No brake operation
		Diagnosis delay time	-