DTC Confirmation Procedure
WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
- Start the engine.
- Turn the MAIN switch of ICC system ON.
- Perform "All DTC Reading" mode.
- Check if the "U1000" is detected as the current malfunction in "Self Diagnostic Result" mode of "ICC/ADAS".
Is "U1000" detected as the current malfunction?
YES
Refer to DIAGNOSIS PROCEDURE .
NO - 1
To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .
NO - 2
Confirmation after repair: Inspection End.