DTC Confirmation Procedure

WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

PRECONDITIONING

If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

GO TO STEP 2 .

DTC REPRODUCTION PROCEDURE

CONSULT
1. Turn the ignition switch OFF to ON.
2. Perform "Self Diagnostic Result" mode of "EPS".
Is DTC "C1607" or "C1608" detected?

YES

Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

NO

Inspection End.