FixVault
Home › Nissan-Datsun › 2016 › Pathfinder S, FWD › Repair and Diagnosis › Electrical › Body Electrical › Power Control System (Power Distribution System) › Removal And Installation › Push Button Ignition Switch › Removal And Installation › Removal

Removal And Installation: Removal

  1. Remove the instrument lower panel LH. Refer to REMOVAL AND INSTALLATION .
  2. Release the pawl (RARROWF ) on each side of the push-button ignition switch and NATS antenna amp. assembly (1) as shown and remove the push-button ignition switch and NATS antenna amp. assembly from the instrument pad (LH) (2).
    Fig 1: Releasing Pawl On Each Side Of NATS Antenna Amp
    G08683349Courtesy of NISSAN NORTH AMERICA, INC.
  3. Release the pawl on each side of the push-button ignition switch and NATS antenna amp. assembly using a suitable tool, then remove the push-button ignition switch from the NATS antenna amp. assembly.
About FixVault