FixVault
Home › Nissan-Datsun › 2016 › Quest SL › Repair and Diagnosis › Engine Performance › System › Engine Control System (Introduction, Wiring Diagrams And Basic Inspection) › Basic Inspection › Fuel Pressure › Work Procedure › Fuel Pressure Release › Without Consult

Without Consult

  1. Remove fuel pump fuse located in IPDM E/R.
  2. Start engine.
  3. After engine stalls, crank it 2 or 3 times to release all fuel pressure.
  4. Turn ignition switch OFF.
  5. Reinstall fuel pump fuse after servicing fuel system.
About FixVault