Distance Sensor Alignment: Preparation

1. Adjust all tire pressures to the specified value.
2. Empty the vehicle. (Remove any luggage from the passenger compartment, luggage room, etc.)
3. Shift the selector lever to "P" position, and release the parking brake.
4. Fully fill the fuel tank, and then check that the coolant and oils are filled up to correct level.
5. Clean off the right front side of the fascia in front of the Distance sensor.
   NOTE:

   The Distance sensor is located behind the fascia and it is not exposed to the elements. Therefore it should not require any cleaning.

   Fig 1: Distance Sensor

   Courtesy of NISSAN NORTH AMERICA, INC.

   1	: Distance sensor

Refer to VEHICLE SET UP .