Active Test Mode: Notes

WARNING: This page is about a different car, the 2016 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Do not perform active test while driving vehicle.
Make sure to completely bleed air from brake system.
The active test cannot be performed with the ABS warning lamp, VDC OFF indicator lamp, SLIP indicator lamp or brake warning lamp on.
ABS warning lamp, VDC OFF indicator lamp, SLIP indicator lamp and brake warning lamp turn on during active test.

NOTE:

When active test is performed while depressing the pedal, the pedal depression amount will change. This is normal.
"TEST IS STOPPED" is displayed 10 seconds after operation start.
After "TEST IS STOPPED" is displayed, to perform test again, touch BACK.