Symptom Table

Perform the data monitor of CONSULT to check for any malfunctioning item.

Check the malfunction combinations.

Malfunction item:

Malfunction combination	Data monitor item
Malfunction combination	FR WIPER HI	FR WIPER LOW	FR WASHER SW	FR WIPER INT	INT VOLUME	RR WIPER ON	RR WIPER INT	RR WASHER SW	TURN SIGNAL R	TURN SIGNAL L	TAIL LAMP SW	HI BEAM SW	HEAD LAMP SW 1	HEAD LAMP SW 2	PASSING SW	FR FOG SW
A		*	*						*	*
B	*			*									*		*
C					*			*				*		*
D					*		*				*
E					*	*										*
F	*				*		*
G			*		*	*		*
H		*		*
I										*				*	*	*
J									*		*	*	*
K	All Items
L	If only one item is detected or the item is not applicable to the combinations A to K

Identify the malfunctioning part from the agreed combination and repair or replace the part.

Malfunction combination	Malfunctioning part	Repair or replace
A	Combination switch INPUT 1 circuit	Inspect the combination switch input circuit applicable to the malfunctioning part. Refer to DIAGNOSIS PROCEDURE .
B	Combination switch INPUT 2 circuit
C	Combination switch INPUT 3 circuit
D	Combination switch INPUT 4 circuit
E	Combination switch INPUT 5 circuit
F	Combination switch OUTPUT 1 circuit	Inspect the combination switch output circuit applicable to the malfunctioning part. Refer to DIAGNOSIS PROCEDURE .
G	Combination switch OUTPUT 2 circuit
H	Combination switch OUTPUT 3 circuit
I	Combination switch OUTPUT 4 circuit
J	Combination switch OUTPUT 5 circuit
K	BCM	Replace BCM. Refer to REMOVAL AND INSTALLATION .
L	Combination switch	Replace the combination switch. Refer to REMOVAL AND INSTALLATION .