Diagnostic Test

SAVING VEHICLE SPECIFICATION

CONSULT Configuration

Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to DESCRIPTION .

NOTE:
If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing BCM.

GO TO STEP 2 .

REPLACE BCM

Replace BCM. Refer to REMOVAL AND INSTALLATION .

GO TO STEP 3 .

WRITING VEHICLE SPECIFICATION

CONSULT Configuration

Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Refer to WORK PROCEDURE .

GO TO STEP 4 (with remote keyless entry system).

GO TO STEP 6 (without remote keyless entry system).

REGISTER IGNITION KEYS

For initialization and registration of ignition keys, refer to CONSULT Immobilizer mode and follow the on-screen instructions.

GO TO STEP 5 .

REGISTER KEYFOB ID

For registration of keyfob ID, refer to ID CODE ENTRY PROCEDURE .

Work End.

REGISTER MECHANICAL KEYS

For initialization and registration of mechanical keys, refer to CONSULT Immobilizer mode and follow the on-screen instructions.

Work End.