Wake-Up Operation

BCM transmits the sleep wake up signal (wake up) to each unit when any of the wake-up conditions are fulfilled. It changes from the low power consumption mode to the normal mode.
Each unit starts the transmission of CAN communication with the sleep wake up signal. Each unit transmits the wake up signal to BCM via CAN communication to report the CAN communication start.

Wake-up condition
Receiving the sleep-ready signal (Not-ready) from any unit Hazard switch: OFF→ON HI BEAM switch: OFF→ON, ON→OFF PASSING switch: OFF→ON, ON→OFF HEADLAMP 1 switch: OFF→ON, ON→OFF HEADLAMP 2 switch: OFF→ON, ON→OFF TAIL LAMP switch: OFF→ON TURN LH: OFF→ON, ON→OFF TURN RH: OFF→ON, ON→OFF Front door switch LH: OFF→ON, ON→OFF Front door switch RH: OFF → ON, ON → OFF Rear door switch LH: OFF→ON, ON→OFF Rear door switch RH: OFF → ON, ON → OFF Stop lamp switch: ON Door lock and unlock switch: NEUTRAL → LOCK, NEUTRAL → UNLOCK Front door lock assembly LH (key cylinder switch): NEUTRAL → LOCK, NEUTRAL → UNLOCK Remote keyless entry receiver: Receiving valid keyfob

Wake-up condition

Receiving the sleep-ready signal (Not-ready) from any unit
Hazard switch: OFF→ON
HI BEAM switch: OFF→ON, ON→OFF
PASSING switch: OFF→ON, ON→OFF
HEADLAMP 1 switch: OFF→ON, ON→OFF
HEADLAMP 2 switch: OFF→ON, ON→OFF
TAIL LAMP switch: OFF→ON
TURN LH: OFF→ON, ON→OFF
TURN RH: OFF→ON, ON→OFF
Front door switch LH: OFF→ON, ON→OFF
Front door switch RH: OFF → ON, ON → OFF
Rear door switch LH: OFF→ON, ON→OFF
Rear door switch RH: OFF → ON, ON → OFF
Stop lamp switch: ON
Door lock and unlock switch: NEUTRAL → LOCK, NEUTRAL → UNLOCK
Front door lock assembly LH (key cylinder switch): NEUTRAL → LOCK, NEUTRAL → UNLOCK
Remote keyless entry receiver: Receiving valid keyfob