Diagnosis Procedure

Regarding Wiring Diagram information, refer to WIRING DIAGRAM .

1. CHECK FRONT POWER WINDOW MOTOR RH INPUT SIGNAL
   
   
   1. Turn ignition switch OFF.
   2. Disconnect front power window motor RH connector.
   3. Turn ignition switch ON.
   4. Check voltage between front power window motor RH harness connector and ground.

   (+)		(-)	Condition		Voltage (V) (Approx.)
   Front power window motor RH
   Connector	Terminal
   D104	2	Ground	Front power window switch RH	NEUTRAL	0
   				UP	Battery voltage
   	1			NEUTRAL	0
   				DOWN	Battery voltage

   Is the inspection result normal?

   YES 

   Replace front power window motor RH.

   NO 

   GO TO STEP 2  .

2. CHECK FRONT POWER WINDOW MOTOR RH CIRCUIT
   
   
   1. Turn ignition switch OFF.
   2. Disconnect power window and door lock/unlock switch RH connector.
   3. Check continuity between power window and door lock/unlock switch RH harness connector and front power window motor RH harness connector.

      Power window and door lock/unlock switch RH		Front power window motor RH		Continuity
      Connector	Terminal	Connector	Terminal
      D105	6	D104	1	Yes
      	7		2

   4. Check continuity between power window and door lock/unlock switch RH harness connector and ground.

      Power window and door lock/unlock switch RH		Ground	Continuity
      Connector	Terminal
      D105	6		No
      	7

   Is the inspection result normal?

   YES 

   Replace power window and door lock/unlock switch RH. Refer to REMOVAL AND INSTALLATION .

   NO 

   Repair or replace harness.