Symptom Table

WARNING: This page is about a different car, the 2016 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.

Perform the data monitor of CONSULT to check for any malfunctioning item.

Check the malfunction combinations.

Malfunction item:

Malfunction Combination	Data Monitor Item
Malfunction Combination	TURN SIGNAL R	TURN SIGNAL L	HI BEAM SW	HEADLAMP SW 1	HEADLAMP SW 2	TAIL LAMP SW	PASSING SW	AUTO LIGHT SW	FR FOG SW	FR WIPER HI	FR WIPER LOW	FR WIPER INT	FR WASHER SW	INT VOLUME
A	*	*									*		*
B				*			*			*		*
C			*		*									*
D						*		*						*
E									*					*
F										*				*
G													*	*
H								*			*	*
I		*			*		*		*
J	*		*	*		*
K	All Items
L	If only one item is detected or the item is not applicable to the combinations A to L

Identify the malfunctioning part from the agreed combination and repair or replace the part.

Malfunction Combination	Malfunctioning Part	Repair Or Replace
A	Combination switch INPUT 1 circuit	Inspect the combination switch input circuit applicable to the malfunctioning part. Refer to DIAGNOSIS PROCEDURE .
B	Combination switch INPUT 2 circuit
C	Combination switch INPUT 3 circuit
D	Combination switch INPUT 4 circuit
E	Combination switch INPUT 5 circuit
F	Combination switch OUTPUT 1 circuit	Inspect the combination switch output circuit applicable to the malfunctioning part. Refer to DIAGNOSIS PROCEDURE .
G	Combination switch OUTPUT 2 circuit
H	Combination switch OUTPUT 3 circuit
I	Combination switch OUTPUT 4 circuit
J	Combination switch OUTPUT 5 circuit
K	BCM	Replace BCM. Refer to REMOVAL AND INSTALLATION .
L	Light and turn signal switch or front wiper and washer switch	Replace the switch that cannot be operated.