FixVault

Component Inspection

  1. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH

    1. Turn power switch OFF.
    2. Disconnect power window and door lock/unlock switch RH connector.
    3. Check power window and door lock/unlock switch RH terminals under the following conditions:
    Front power window and door lock/unlock switch RH Condition Continuity
    Terminal
    8 7 UP Yes
    11 6
    11 6 NEUTRAL
    12 7
    8 6 DOWN
    12 7

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace power window and door lock/unlock switch RH.