System Description

IPDM E/R activates the internal control circuit to perform the relay ON - OFF control according to the input signals from various sensors and the request signals received from control units via CAN communication.

CAUTION:

To prevent damage to the parts, IPDM E/R integrated relays cannot be removed.

Control relay	Input/output	Transmit unit	Control part	Reference
Headlamp low relay Headlamp high relay	Low beam request signal High beam request signal	BCM (CAN)	Headlamp LO Headlamp HI	SYSTEM DIAGRAM
Tail lamp relay	Position light request signal	BCM (CAN)	Parking lamp Side marker lamp License plate lamp Tail lamp	SYSTEM DIAGRAM
Tail lamp relay	Position light request signal	BCM (CAN)	Illuminations	SYSTEM DIAGRAM
Front wiper relay Front wiper high relay	Front wiper request signal	BCM (CAN)	Front wiper motor	SYSTEM DESCRIPTION
Front wiper relay Front wiper high relay	Front wiper stop position signal	Front wiper motor	Front wiper motor	SYSTEM DESCRIPTION
Starter control relay	Ignition switch START signal	Transmission range switch (with A/T) Clutch interlock switch (with M/T)	Starter motor	SYSTEM DESCRIPTION
Cooling fan relay 1 Cooling fan relay 2	Cooling fan speed request signal	ECM (CAN)	Cooling fan	COOLING FAN
A/C relay	A/C compressor request signal	ECM (CAN)	A/C compressor (Magnet clutch)	SYSTEM DESCRIPTION
Ignition relay	Ignition switch ON signal	Ignition switch	Each control unit, sensor, actuator and relay (Ignition power supply)	SYSTEM DESCRIPTION