Component Function Check

CHECK FUNCTION

Select "TILT SW-UP", "TILT SW-DOWN" in "DATA MONITOR" mode with CONSULT.

Check tilt switch signal under the following conditions.

Monitor item	Condition		Status
TILT SW-UP	Tilt switch (upward)	Operate	ON
TILT SW-UP	Tilt switch (upward)	Release	OFF
TILT SW-DOWN	Tilt switch (downward)	Operate	ON
TILT SW-DOWN	Tilt switch (downward)	Release	OFF

Is the inspection result normal?

YES

Inspection End.

NO

Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .