Work Procedure

STEP 1

There are two ways of setting method.

Which method do you choose?

With CONSULT

GO TO STEP 2 .

With set switch

GO TO STEP 3 .

STEP 2-A (WITH CONSULT)
1. Select "Work support".
2. Select "EXIT SEAT SLIDE SETTING" then touch display to change between ON and OFF.
  - EXIT SEAT SLIDE SETTING: Entry/exit assist (seat)
3. Select "SEAT SLIDE VOLUME SET" and touch either of "40 mm", "80 mm", or "150 mm".
4. Then touch "OK".
GO TO STEP 4.

STEP 2-B (WITH SET SWITCH)
1. Turn ignition switch OFF.
2. Push set switch and hold for more than 10 seconds.
GO TO STEP 4.

CONFIRM THE OPERATION

Check the entry/exit assist function setting is changed.

Is the setting changed?

YES

END

NO

GO TO STEP 1.