FixVault

Data Monitor

NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Item
[Unit]
Description
IGN VOLT [V] Displays the ignition power supply voltage.
CONTROL MODULE MALF [Off / On] Displays the chassis control module malfunction.
CAN DIAG STATUS [Off / On] Displays CAN network diagnosis status.
STP LAMP OFF RELAY 1 - Displayed but not used.
STP LAMP OFF RELAY 2 - Displayed but not used.
ESS RELAY - Displayed but not used.
VEHICLE SPEED [km/h] Displays the vehicle speed.
FR WHEEL SPEED [rpm] Displays the rotational speed of front RH tire.
FL WHEEL SPEED [rpm] Displays the rotational speed of front LH tire.
RR WHEEL SPEED [rpm] Displays the rotational speed of rear RH tire.
RL WHEEL SPEED [RPM] Displays the rotational speed of rear LH tire.
STEERING ANG SENSOR [deg] Displays the steering angle from the steering angle sensor.
DECEL G SENSOR [G] Displays the decel G.
SIDE G SENSOR [G] Displays the side G.
YAW RATE SENSOR [deg/s] Displays the yaw rate.
ACCELE PEDAL POSITION [%] Displays the accelerator pedal position.
THROTTLE CONTROL [NORMAL / INCORR / PREV / INPOSSI] Displays the electric throttle status.
SHIFT POSITION - Displayed but not used.
BRAKE SWITCH 2 [Off / On] Displays the brake pedal operating status.
BRAKE SWITCH 1 [Off / On] Displays the brake pedal operating status.
STOP LAMP SW [ACT / INACT] Displays the stop lamp switch status.
PRESS SENSOR [bar] Displays the brake fluid pressure.
ABS [NORMAL / ABNOR] Displays the ABS function status.
ABS MALF [NORMAL / ABNOR] Displays the ABS function status.
EBD [NORMAL / ABNOR] Displays the EBD function status.
ACCELE PEDAL MALF [NORMAL / ABNOR] Displays the accelerator pedal status.
TCS [NORMAL / ABNOR] Displays the TCS function status.
TCS MALF [NORMAL / ABNOR] Displays the TCS function status.
VDC [NORMAL / ABNOR] Displays the VDC function status.
VDC MALF [NORMAL / ABNOR] Displays the VDC function status.
VDC OFF SWITCH [Off / On] Displays VDC OFF switch status.
PARKING BRAKE - Displayed but not used.
DRV TRQ CTRL MODE [INITIAL / NORMAL / STOP 1 / STOP 2 / LIMIT 1 / PROHIBI] Displays the status of correction to slightly increase/decrease the drive torque.
DRV TRQ CTRL PERMIS 1 [NO PER / PERMIS] Displays the permission status (basic requirement) of correction to slightly increase/decrease drive torque.
DRV TRQ CTRL PERMIS 2 [NO PER / PERMIS] Displays the permission status (system requirement) of correction to slightly increase/decrease drive torque.
DRV TRQ CTRL STOP [REQ / NO REQ] Displays the stop request status of correction to slightly increase decrease drive torque.
DRV TRQ CTRL PROHIBIT [REQ / NO REQ] Displays the precaution request status of correction to slightly increase/ decrease drive torque.
AEB [Off / On] Displays the active engine brake (brake control) function operation status.
ATC 1 [Off / On] Displays the active trace control function operation status.
ATC 2 [Off / On] Displays the active trace control function operation status.
ATC 4 [Off / On] Displays the active trace control function operation status.
BRAKE HOLD [ACT / INACT / RELEA] Displays the brake hold status.
ATC 3 [Off / On] Displays the active trace control function operation status.
ATC 5 [Off / On] Displays the active trace control function operation status.
ARC BRAKE [Off / On] Displays the active ride control (brake control) function operation status.
FL TIRE DISP [DEF / 1] Displays the status of front LH tire displayed on the information display in the combination meter.
FR TIRE DISP [DEF / 1] Displays the status of front RH tire displayed on the information display in the combination meter.
RL TIRE DISP [DEF / 1] Displays the status of rear LH tire displayed on the information display in the combination meter.
RR TIRE DISP [DEF / 1] Displays the status of rear RH tire displayed on the information display in the combination meter.
VEHICLE DISP [DEF / 1] Displays the operating status of active ride control (brake control) function displayed on the information display in the combination meter.
INTERRUPT DISP [NO REQ / HOLD 1 / HOLD 2 / HDC] Displays the interruption status on the information display in the combination meter.
TURN DISP [N STEER / LEFT / RIGHT] Displays the turning direction of active trace control function and active engine brake function on the information display in the combination meter.
ALC LEVEL [0 - 4] Displayed but not used.
ALC STATUS [INACT / ACT] Displayed but not used.
BRAKE HOLD DISP [ACT / INACT / RELEA] Displays the operating status of hill start assist function displayed on the information display in the combination meter.
ATC DISP [Off / On] Displays the operating status of active trace control function displayed on the information display in the combination meter.
ARC BRAKE DISP [Off / On] Displays the operating status of active ride control (brake control) function displayed on the information display in the combination meter.
HDC DISP [Off / On] Displayed but not used.
AEB CVT PERMIT [Off / On] Displays the transaxle authorized state for active engine brake function.
AEB STATUS [Off / On] Displays the setting status of active engine brake function.
AEB COMMAND 1 [G] Displays the relative command value of active engine brake function.
AEB COMMAND 2 - Displayed but not used.
AEB SLIP RATE [%] Displays the slip ratio of active engine brake function is operating.
ATC SETTING [Off / On] Displays the setting status of active trace control function by steering switch.
AEB SETTING [Off / On] Displays the setting status of active engine brake function by steering switch.