FixVault
Home › Nissan-Datsun › 2017 › Sentra SL › Repair and Diagnosis › External Pages › Different variant/trim › Section 18 (Fuel System (1.6L)) › Disassembly And Assembly › Fuel Level Sensor Unit › Disassembly And Assembly › Disassembly

Disassembly And Assembly: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect fuel level sensor unit harness connector.
    NOTE:

    Hold connector with your fingers, because there is no tab for releasing stopper. Pull it out straight downward.

  2. Press in the pawl of fuel level sensor mounting surface.
    CAUTION:

    Be careful not to damage anything.

  3. With the pawl disengaged, remove fuel level sensor by sliding it down.
    CAUTION:
    • Be careful not to damage fuel level sensor unit.
    • Do not disassemble fuel filter and fuel pump assembly.
About FixVault