DTC Confirmation Procedure

If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test.

1. Turn ignition switch OFF and wait at least 10 seconds.
2. Turn ignition switch ON.
3. Turn ignition switch OFF and wait at least 10 seconds.

Which DTC is detected?

P0102 

GO TO STEP 2  .

P0103 

GO TO STEP 3  .

1. Start engine and wait at least 5 seconds.
2. Check DTC.

Is DTC detected?

YES 

Go to DIAGNOSIS PROCEDURE .

NO 

INSPECTION END

1. Turn ignition switch ON and wait at least 5 seconds.
2. Check DTC.

Is DTC detected?

YES 

Go to DIAGNOSIS PROCEDURE .

NO 

GO TO STEP 4  .

1. Start engine and wait at least 5 seconds.
2. Check DTC.

Is DTC detected?

YES 

Go to DIAGNOSIS PROCEDURE .

NO 

INSPECTION END