Input And Output Signals
Major signal transmission between each unit via communication lines is shown in the following table.
|
Component |
Signal Description |
|
Yaw rate/side/decel G sensor |
Mainly transmits the following signals to ABS Actuator And Electric Unit (Control Unit) via communication line *1 :
|
|
Transfer control unit *2 |
Mainly receives the following signal from ABS Actuator And Electric Unit (Control Unit) via CAN communication:
|
|
Combination meter |
Mainly receives the following signal from ABS Actuator And Electric Unit (Control Unit) via CAN communication:
|
*1: Communication line between yaw rate/side/decel G sensor and ABS Actuator And Electric Unit (Control Unit)
*2: Models with 4WD system