Engine Control System (Basic Inspection) (5.6L)

• Ecu Diagnosis Information
  • ECM
    • Values on the Diagnosis Tool
    • Reference Value
      • Terminal Layout
      • Physical Values
    • Fail-safe
    • DTC Inspection Priority Chart
    • DTC Index
    • Test Value and Test Limit
  • VVEL Control Module
    • Reference Value
      • Terminal Layout
      • Physical Values
• Wiring Diagram
  • Engine Control System
    • Wiring Diagram
• Basic Inspection
  • Diagnosis And Repair Workflow
    • Work Flow
      • Overall Sequence
    • Diagnostic Work Sheet
      • Description
      • Worksheet Sample
  • Basic Inspection
    • Work Procedure
  • Additional Service When Replacing ECM
    • Description
      • Notes
      • Programming Operation
      • Before Replacement
      • After Replacement
    • Work Procedure
  • Additional Service When Replacing VVEL Control Module
    • Description
    • Work Procedure
  • VIN Registration
    • Description
    • Work Procedure
  • Accelerator Pedal Released Position Learning
    • Description
    • Work Procedure
  • Throttle Valve Closed Position Learning
    • Description
    • Work Procedure
  • Idle Air Volume Learning
    • Description
    • Work Procedure
  • VVEL Control Shaft Position Sensor Adjustment
    • Description
    • Work Procedure
  • Mixture Ratio Self-Learning Value Clear
    • Description
    • Work Procedure
  • Fuel Pressure
    • Work Procedure
      • Fuel Pressure Release
      • Low Fuel Pressure Check
      • High Fuel Pressure Check
  • How To Set SRT Code
    • Description
      • Outline
      • SRT Item
      • SRT Service Procedure
    • SRT Set Driving Pattern
    • Work Procedure
  • How To Erase Permanent DTC
    • Description
      • Notes
      • Outline
      • Permanent DTC Item
      • Permanent DTC Service Procedure
    • Work Procedure (Group A)
    • Work Procedure (Group B)