Removal And Installation: Installation
WARNING: This page is about a different car, the 2020 Fiat 124 Spider. However, it is still accessible from the selected car via links, so may be relevant.
- If removed, install the Radio/ETM to the radio display. Refer to DISPLAY, RADIO, REMOVAL AND INSTALLATION .
- Connect all the wiring harness connectors to the back of the radio assembly.
- Install the radio assembly into the instrument panel, be sure that all the clips are fully engaged.
- Install and securely tighten the radio assembly mounting screw.
- Connect the wiring harness connector (1).
- Install the center trim bezel (1b), be sure that all the clips are fully engaged.
- Install the lower right instrument panel trim. Refer to PANEL, INSTRUMENT PANEL TRIM, REMOVAL AND INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.