Diagnosis Procedure
CAUTION:
- VDC function, TCS function, ABS function, EBD function and brake assist function never operate when the vehicle speed is 10 km/h (6.2 MPH) or less.
- VDC function and TCS function never operate when VDC OFF switch is operated (when VDC OFF indicator lamp turns ON).
- CHECK WARNING LAMP
Check that ABS warning lamp, brake warning lamp and VDC warning lamp turn ON and turn OFF approx. 1 second after power switch is turned ON. Check that ABS warning lamp, brake warning lamp and VDC warning lamp and stay in OFF status during driving.
CAUTION: Brake warning lamp turns ON when brake fluid is less than the specified level (brake fluid level switch is ON).Is the inspection result normal?
YES
Normal
NO
GO TO 2.
- PERFORM SELF DIAGNOSTIC RESULT
CONSULT
- Turn the power switch OFF -->ON.CAUTION:
- Be sure to wait of 10 seconds after placing power switch OFF or ON.
- Set the vehicle to READY.
- Repeat step 1 two or more times.
- Select "Self Diagnostic Result" mode of "ABS".
Is any DTC detected?
YES
Check the DTC. Check the DTC. Refer to DTC Index .
NO
Inspection End.
- Turn the power switch OFF -->ON.