Data Monitor

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor Item [Unit]	Main Signals	Description
AC COMP REQ [Off/On]	x	NOTE: The item is indicated, but not monitored.
TAIL&CLR REQ [On/Off]	x	Indicates position light request signal received from BCM on CAN communication line
HL LO REQ [On/Off]	x	Indicates low beam request signal received from BCM on CAN communication line
HL HI REQ [On/Off]	x	Indicates high beam request signal received from BCM on CAN communication line
FR FOG REQ [On/Off]	x	Indicates front fog light request signal received from BCM on CAN communication line
FR WIP REQ [Stop/1LOW/Low/Hi]	x	Indicates front wiper request signal received from BCM on CAN communication line
WIP AUTO STOP [STOP P/ACT P]	x	Indicates condition of front wiper auto stop signal
WIP PROT [Off/BLOCK]	x	Indicates condition of front wiper fail-safe operation
IGN RLY1 -REQ [On/Off]	Indicates power switch ON signal received from BCM on CAN communication line
IGN RLY [On/Off]	x	Indicates condition of ignition relay-1
PUSH SW [On/Off]	Indicates condition of power switch
INTER/NP SW [Off/On]	NOTE: The item is indicated, but not monitored.
ST RLY CONT [Off/ ST /INHI]	Indicates condition of starter relay
IHBT RLY -REQ [Off/On]	NOTE: The item is indicated, but not monitored.
ST/INHI RLY [Off/ ST ON/INHI ON/UNKWN]	NOTE: The item is indicated, but not monitored.
DETENT SW [On/Off]	Indicates condition of shift position (park position switch)
DTRL REQ [On/Off]	Indicates daytime running light request signal received from BCM on CAN communication line
OIL P SW [Open/Close]	NOTE: The item is indicated, but not monitored.
HOOD SW [On/Off]	Indicates condition of hood switch
THFT HRN REQ [On/Off]	Indicates theft warning horn request signal received from BCM on CAN communication line
HORN CHIRP [On/Off]	Indicates horn reminder signal received from BCM on CAN communication line