Air Bag Diagnosis Sensor Unit
Before Replacement
When replacing air bag diagnosis sensor unit, save or print current vehicle specification with CONSULT configuration before replacement.
NOTE:
If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing air bag diagnosis sensor unit.
After Replacement
CAUTION:
Follow the instructions listed below. Failure to do this may cause malfunctions to the air bag diagnosis sensor unit.
- Never perform "Read / Write Configuration" or "Manual Configuration" except for new air bag diagnosis sensor unit.
- When replacing air bag diagnosis sensor unit, you must perform "Read / Write Configuration" or "Manual Configuration" with CONSULT.
- Complete the procedure of "Read / Write Configuration" or "Manual Configuration" in order.
- If you set incorrect "Read / Write Configuration" or "Manual Configuration", incidents might occur.
- Configuration is different for each vehicle model. Confirm configuration of each vehicle model.