Active Test

CAUTION:

Never perform "Active Test" while driving the vehicle.
The "Active Test" cannot be performed when the following systems malfunction is displayed.
- ICC
- LDW
- BSW
The "Active Test" cannot be performed when the AEB warning lamp is illuminated.
Shift the selector lever to "P" position, and then perform the test.

Test item	Description
Vibration motor	Operate a steering vibration motor used for LDW system by arbitrarily operating ON/OFF
Switch lamp	The warning systems ON indicator (on sonar system OFF switch) can be illuminated by ON/OFF operations as necessary
METER LAMP	AEB warning lamp can be illuminated by ON/OFF operations as necessary
DRIVE MODE TEST	NOTE: The item is displayed, but not used
ADAS buzzer 2	Sounds a buzzer used for following systems by arbitrarily operating ON/OFF Intelligent Cruise Control (ICC) Blind Spot Warning (BSW) Rear Cross Traffic Alert (RCTA)

VIBRATION MOTOR

Test item	Operation	Description	Vibration motor
Vibration motor	Off	Stops sending the steering vibration motor signal to end the test	OFF
Vibration motor	On	Transmits the motor operation signal to the steering vibration motor	ON

Switch lamp

Test item	Operation	Description	Switch lamp
Vibration motor	Off	Stops sending the steering vibration motor signal to end the test	OFF
Vibration motor	On	Transmits the motor operation signal to the steering vibration motor	ON

METER LAMP

NOTE: The test can be performed only when the engine is running.

Test item

Operation

Description

METER LAMP

Off

Stops sending the following signals to exit from the test

OFF

Transmits the following signals to the combination meter via CAN communication

ADAS BUZZER 2

Test item	Operation	Description	Driver assistance buzzer
ADAS buzzer 2	Off	Stops transmitting the driver assistance buzzer signal to end the test	--
ADAS buzzer 2	On	Transmits the driver assistance buzzer signal to the driver assistance buzzer	ON