After Replacement
CAUTION:
After replacing the BCM, always perform "Operation Log Selection" or "Manual Configuration" with CONSULT, or not doing so, the BCM control function will not operate normally.
After installing a new BCM service part, if the Intelligent Key UNLOCK button is pressed before performing the configuration with CONSULT-III plus, certain BCM configuration parameters will be permanently locked in the default setting; one of these parameters is Remote Engine Start.
- Complete the procedure of "Re/programming, Configuration" in order.
- Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
- If you set incorrect "Vehicle Configuration", incidents might occur.
- It is not necessary to register Intelligent Keys to a new BCM.