FixVault
Home › Nissan-Datsun › 2023 › Ariya Empower+ › Repair and Diagnosis › Steering › Steering Control Systems › Steering Control System › Basic Inspection › Steering Control System › Res Reset › Work Procedure

Work Procedure

NOTE: SYMBOL
  • When steering column assembly and steering gear assembly are replaced, RES reset (steering angle learning value reset) is performed.
  • When the toe-in is adjusted, RES reset (steering wheel turning angle learning value reset) is performed.
  1. RES RESET 

    SYMBOL With CONSULT

    1. Set the vehicle to READY.
    2. Select "EPS/DIRECT ADAPTIVE STEERING 3", "Work support", and "Rack end value reset" in the order.
    3. Touch "Start".
    4. Touch "End".

    >>

    GO TO 2.

  2. RES LEARNING 

    SYMBOL With CONSULT

    1. The steering wheel from full left stop to full right stop.
    2. Select "EPS/DIRECT ADAPTIVE STEERING 3" and "Data monitor" in the order.
    3. Select "Rack end learning status (Left)" and "Rack end learning status (Right)", and check that the display is "Completed".

    Is the inspection result normal?

    YES>>

    GO TO 3.

    NO>>

    There is a possibility that resetting and learning have not been performed correctly, so start over from Step 1. GO TO 1.

  3. ERASE SELF DIAGNOSTIC RESULT 

    SYMBOL With CONSULT

    1. Record or print self-diagnosis results and freeze frame data (FFD).
    2. Erase self-diagnostic results for "EPS/DIRECT ADAPTIVE STEERING 3".

    Is the memory erase completed?

    YES>>

    INSPECTION END

    NO>>

    Check the items displayed in the self-diagnosis.

About FixVault