Work Procedure

1. Fully open the door glass.
2. Place a piece of wood near fully closed position.
3. Close door glass completely with AUTO UP.
4. Check the following conditions.
   • Check that door glass lowers for approximately 145 mm (5.71 in) or more without pinching piece of wood and stops.
   • Check that door glass does not rise when operating the power window main switch while lowering.
     CAUTION:

     • Perform initial setting when AUTO UP operation or anti-pinch function does not operate normally.
     • Check that AUTO UP operates before inspection when system initialization is performed.
     • Never check with hands and other body parts because they may be pinched. Never get pinched.

>>

END