Component Inspection

1. Turn ignition switch OFF.
2. Disconnect EOP sensor harness connector.
3. Check resistance between EOP sensor connector terminals.

   EOP sensor		Condition	Resistance (kOhm)
   +	-
   Terminal
   1	2	None	4 - 10
   	3		2 - 8
   2	1		4 - 10
   	3		1 - 3
   3	1		2 - 8
   	2		1 - 3

Is the inspection result normal?

YES

INSPECTION END.

NO

Replace EOP sensor. Refer to OIL PAN (LOWER) AND OIL STRAINER : Exploded View .