Application Items

WARNING: This page is about a different car, the 2022 Nissan Rogue. However, it is still accessible from the selected car via links, so may be relevant.

CONSULT performs the following functions via CAN communication using ADAS control unit 2.

Diagnosis mode	CGW Status			Description
Diagnosis mode	Restricted Mode	Diag Test Mode	Open Mode	Description
Self Diagnostic Result	Display	Display	Display	Retrieve DTC from ECU and display diagnostic items
CGW Information	Display	Display	Display	Display the current CGW mode Enables CGW to switch mode
Data Monitor	Display	Display	Display	Monitor the input/output signal of the control unit in real time
Work Support	Non-display	Non-display	Display	This mode enables a technician to adjust some devices faster and more accurately
Active Test	Non-display	Display	Display	Send the drive signal from CONSULT to the actuator The operation check can be performed
ECU Identification	Display	Display	Display	Display the ECU identification number (part number etc.) of the selected system
Configuration*	Display	Display	Display	The vehicle specification can be written when the control unit is replaced
Network-DTC*	Display	Display	Display	Display network DTC which the control unit memorizes when performing "Diagnosis (All System)".
MAC Diagnosis*	Display	Display	Display	Display MAC diagnosis result divided into the following two inspection priorities. Inspection Priority 1: Root cause Inspection Priority 2
CAN Diag Support Monitor*	Display	Display	Display	It monitors the status of CAN communication

*: Displays when performing "Diagnosis (All System)".