Work Procedure

Always perform the AEB system action test to check that the system operates normally after replacing the ADAS control unit or replacing the front camera unit, or repairing any AEB system malfunction.

1. CHECK AEB SYSTEM SETTING 
   1. Start the engine.
   2. Check that the AEB system setting can be enabled/disabled on the information display.
   3. Turn OFF the ignition switch and wait for 30 seconds or more.
   4. Check that the previous setting is saved when the engine starts again.

   >>

   GO TO 2

   .

2. CHECK AEB SYSTEM 
   1. Enable the setting of the AEB system on the information display.
   2. Check AEB warning lamp is OFF.

   >>

   INSPECTION END