Component Function Check

With CONSULT

1. Turn power switch ON.
2. Select "Quick charge permit signal circuit" in "ACTIVE TEST" mode of "EV/HEV" using CONSULT.
3. Select "Quick Charge Permit" of "DATA MONITOR" item.
4. Switch the quick charge permit signal circuit between ON and OFF to check that the "Quick Charge Permit" indication changes.
5. Switch the quick charge permit signal circuit between ON and OFF to check that the "Quick Charge Permit" indication changes, also change the voltage between quick charge port harness connector and ground.

   Monitor item	Conditions (Active test)		Indication
   Quick Charge Permit	Quick charge permit signal circuit	ON	ON
   		OFF	OFF

   +	-	Conditions (Active test)		Voltage
   Quick charge port
   Terminal
   4	Body ground	Quick charge permit signal circuit	ON	1.0 V or less
   			OFF	OPEN

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Refer to Diagnosis Procedure .