FixVault
Home › Nissan-Datsun › 2024 › Rogue SL, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (2 Of 2) › Removal And Installation › ECM › ECM : Removal and Installation

ECM : Removal and Installation

CAUTION:
  • Perform ADDITIONAL SERVICE WHEN REPLACING ECM. Refer to Work Procedure .
  • When replacing the ECM, a new ECM must be used. The functions controlled by the ECM do not operate properly if an ECM from another vehicle is used.
  • Perform "ELECTRIC INTAKE VALVE TIMING CONTROL LEARNING". Refer to Work Procedure

REMOVAL 

  1. Remove the battery. Refer to Removal and Installation .
  2. Disconnect the harness connectors from the ECM. Refer to Harness Connector (lever locking type).
  3. Remove the battery tray. Refer to BATTERY TRAY ; Removal and Installation .
  4. Remove the ECM and bracket assembly.
  5. Remove the nuts and ECM from the bracket.

INSTALLATION 

Installation is in the reverse order of removal.

CAUTION:

Perform "ADDITIONAL SERVICE WHEN REPLACING ECM". Refer to Work Procedure .

About FixVault