Work Procedure
- WRITING VEHICLE SPECIFICATION
With CONSULT Perform writing vehicle specification to air bag diagnosis sensor unit following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual.
NOTE:- Log in the network according to CONSULT guidance.
- For details the network connection and operation, refer to "CONSULT Operation Manual".
>>
GO TO 2
- CHECK ALL ECU SELF-DIAGNOSIS RESULTS
- Erase all ECU self-diagnosis results using CONSULT.
- Ignition switch OFF.
- Ignition switch ON.
- Check that all ECU self-diagnosis results have no DTC.
>>
WORK END