FixVault

System Description

OPERATION CHARACTERISTICS 

SYSTEM DIAGRAM 

GNSDB109961Courtesy of NISSAN NORTH AMERICA, INC.

INPUT SIGNAL AND OUTPUT SIGNAL 

Major signal transmission between each unit via communication lines is shown in the following table.

Component parts Signal description
ECM Mainly transmits the following signals to chassis control module (with built in steering angle sensor) via CAN communication.
  • Accelerator pedal position signal
ABS actuator and electric unit (control unit) Mainly transmits the following signals to chassis control module (with built in steering angle sensor) via CAN communication.
  • ABS operation signal
  • Brake fluid pressure signal
  • Decel G sensor signal
  • Front LH wheel speed signal
  • Front RH wheel speed signal
  • Rear LH wheel speed signal
  • Rear RH wheel speed signal
  • TCS operation signal
  • VDC accept permission signal
  • VDC operation signal
  • Vehicle speed signal

Mainly receives the following signals from chassis control module (with built in steering angle sensor) via CAN communication.
  • Active ride control signal
Combination meter Mainly receives the following signals from chassis control module (with built in steering angle sensor) via CAN communication.
  • Meter display signal