Work Procedure
WARNING: This page is about a different car, the 2023 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- Perform action test to verify the customer's concern.
- Perform action test and check the system operation after system diagnosis.
Warning:
WARNING:
Be careful of traffic conditions and safety around the vehicle when performing road test.
CAUTION:
- Fully understand the following items well before the road test;
- System description for TSR: Refer to System Description .
- Handling precaution: Refer to Precautions for Traffic Sign Recognition .
- CHECK TSR SYSTEM SETTING
-
- Start the engine.
- After starting the engine wait for 30 seconds or more.
- Enable the setting of the TSR system on the information display.
- Turn OFF the ignition switch and wait for 5 seconds or more.
- Check that the previous setting is saved when the engine starts again.
>>
GO TO 2.
-
- ACTION TEST FOR LDW
-
- Enable the setting of the TSR system on the information display.
- Check the TSR operation according to the following table.4.2 inch Information Display
System status Condition Display on combination meter Upper part Middle part TSR OFF - - TSR ON Road sign not detected - Road sign detected (except for speed limit signs) - This is an example. For details of displayed signs, Refer to System Description . Road sign detected (Speed limit signs) This is an example. For details of displayed signs, Refer to System Description . This is an example. For details of displayed signs, Refer to System Description . 7 inch Information DisplaySystem status Condition Display on combination meter Upper part Middle part TSR OFF - - TSR ON Road sign not detected - Road sign detected (except for speed limit signs) - This is an example. For details of displayed signs, Refer to System Description . Road sign detected (Speed limit signs) This is an example. For details of displayed signs, Refer to System Description . This is an example. For details of displayed signs, Refer to System Description .
>>
INSPECTION END
-