Work Procedure
WARNING: This page is about a different car, the 2023 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- Always perform the front camera unit configuration after replacing the front camera unit.
- Always perform the camera aiming after removing and installing or replacing the front camera unit.
CAUTION:
The system does not operate normally unless the front camera unit configuration and the camera aiming adjustment are performed. Always perform them.
- FRONT CAMERA UNIT CONFIGURATION
- Perform the front camera unit configuration with CONSULT. Refer to Work Procedure .
>>
GO TO 2.
- CAMERA AIMING ADJUSTMENT
- Perform the camera aiming adjustment with CONSULT. Refer to Work Procedure .
>>
GO TO 3.
- PERFORM SELF-DIAGNOSIS
- Perform the self-diagnosis of front camera unit with CONSULT. Check if any DTC is detected.
Is any DTC detected?
YES>>
Perform the trouble diagnosis for the detected DTC. Refer to DTC Index .
NO>>
GO TO 4.
- LDW/AEB SYSTEM ACTION TEST
-
- Perform the LDW/AEB system action test.
- LDW: Refer to Work Procedure .
- AEB: Refer to Work Procedure .
- Check that the LDW/AEB system operates normally.
- Perform the LDW/AEB system action test.
>>
WORK END
-