FixVault
Home › Oldsmobile › 1986 › Custom Cruiser › Repair and Diagnosis › External Pages › Different car › Section 9 (Wheel Alignment Specifications & Procedures) › Alignment Specifications

Alignment Specifications

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1986 Pontiac Grand Prix, 1986 Pontiac Bonneville, 1986 Oldsmobile Cutlass, 1986 GMC Caballero, and 1986 Chevrolet Monte Carlo. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS (REGAL)(1)

Application Specification
Caster (Degrees) (2) + 3 +/- 1
Camber (Degrees) (3) + .5 +/- .8
Toe-in + .15° +/- .1°
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Positive degrees indicate toe-in; negative degrees indicate toe-out.
(2) Maximum side-to-side difference 1°.
(3) Maximum side-to-side difference 1/2°
WHEEL ALIGNMENT SPECS (CABALLERO, EL CAMINO, MONTE CARLO)(1)

Application Specification
Caster (Degrees) (2) Man. St. + 1 +/- 1
**************** (2) Pw. St. + 3 +/- 1
Camber (Degrees) + 1/2 +/- 8/10
Toe-in (Inches) + 1/8 +/- 1/16
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Positive degrees indicate toe-in; negative degrees indicate toe-out.
(2) Maximum side-to-side difference 1°.
WHEEL ALIGNMENT SPECIFICATIONS (CUTLASS) (1)

Application Specification
Caster (Degrees) + 2.8 +/- 1
Camber (Degrees) + .8 +/- .8
Toe-in (Inches) .15° +/- .1°
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Positive degrees indicate toe-in; negative degrees indicate toe-out.
WHEEL ALIGNMENT SPECIFICATIONS (BONNEVILLE, GRAND PRIX) (1)

Application Specification
Caster (Degrees) Man St. + .8 +/- 1
**************** (2) Pw. St. + 2.8 +/- 1
Camber (Degrees) + .5 +/- .8
Toe-in (Degrees) + .15° +/- .1°
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Positive degrees indicate toe-in; negative degrees indicate toe-out.
(2) Maximum side-to-side difference 1°.
About FixVault