Full T.V. Pressure Check

With T.V. cable at full extent of its travel and brakes applied, check line pressure in ranges and at engine RPM indicated in CONTROL PRESSURE SPECIFICATIONS .

CONTROL PRESSURE SPECIFICATIONS

MODEL CODE

RANGE @ RPM ⁽¹⁾

Min. T.V. psi

Minimum T.V. kg/cm ⁽¹⁾

Max. T.V. psi

Maximum T.V. kg/cm ⁽¹⁾

BH, CA, CU HH, HL, KB

Park @ 1000

66-74

4.64-5.20

66-74

4.64-5.20

BH, CA, CU HH, HL

Reverse ⁽²⁾ @ 1000

147-215

10.34-15.12

205-264

14.55-17.93

Reverse ⁽²⁾ @ 1000

147-215

10.34-15.12

200-264

14.06-17.93

BH, CA, CU HH, HL

Neutral @ 1000

67-78

4.71-5.48

127-143

8.93-10.05

Neutral @ 1000

67-78

4.71-5.48

120-135

8.44-9.49

BH, CA, CU HH, HL

Drive @ 1000

67-78

4.71-5.48

127-143

8.93 10.05

Drive @ 1000

67-78

4.71-5.48

120-135

8.44-9.49

BH, CA, CU HH, HL, KB

Intermediate @ 1000

129-156

9.07-10.90

129-157

9.14-11.04

BH, CA, CU HH, HL, KB

Low @ 1000

130-155

9.14-10.90

129-157

9.07-11.04

⁽¹⁾	Total running time for this combination of tests is not to exceed 2 minutes. Brakes must be applied at all times.

⁽²⁾	Maximum T.V. reverse line pressure to be checked at 2000 RPM.

CLUTCH & BAND APPLICATION (ELEMENTS IN USE)

Lever Position	Direct Clutch	Forward Clutch	Low-R Clutch	Intermed. Band	Low Roller Clutch
Drive: First	OFF	ON	OFF	OFF	ON
Drive: Second	OFF	ON	OFF	ON	OFF
Drive: Third	ON	ON	OFF	OFF	OFF
2-Intermediate First	OFF	ON	OFF	OFF	ON
2-Intermediate Second	OFF	ON	OFF	ON	OFF
1-Low First	OFF	ON	ON	OFF	ON
1-Low Second	OFF	ON	OFF	ON	OFF
Reverse	ON	OFF	ON	OFF	OFF