FixVault
Home › Oldsmobile › 1991 › Bravada › Repair and Diagnosis › Body & Frame › Power Windows › Removal & Installation › Power Window Motor › Installation

Power Window Motor: Installation

  1. Fit motor to the regulator.
  2. Install 4.8 mm (3/16 inch) rivets to the motor and regulator. Using tool J 20922-A. See SPECIAL TOOLS  .
  3. Remove nut and bolt used to lock the sector gear in position.
  4. Install regulator lift arm roller to the window mount sash.
  5. Connect wire harness to the motor.
  6. Install water deflector. See WATER DEFLECTOR  .
  7. Install armrest bracket. See ARMREST  .
  8. Install door trim panel. See TRIM PANEL  .
  9. Connect negative (-) battery cable.
About FixVault