Driver-Side Inflator Module: Installation
WARNING: This page is about a different car, the 1992 Oldsmobile Toronado, 1992 Cadillac Seville, 1992 Cadillac Eldorado, 1992 Cadillac Allante, and 1992 Buick Riviera. However, it is still accessible from the selected car via links, so may be relevant.
- Install horn contact, steering wheel inflator module connector and CPA clip. Install inflator module to steering wheel.
- Tighten screws to 27 INCH lbs. (3.1 N.m). To complete installation, reverse removal procedure. Check INFLATABLE RESTRAINT indicator light to ensure system is functioning properly. See TESTING - SYSTEM OPERATION CHECK .