FixVault
Home › Oldsmobile › 1992 › Achieva SL, 2D Coupe, 2.3 D › Repair and Diagnosis › Body & Frame › Door Locks › Remote Keyless Entry System › Removal & Installation › Keyless Entry Module › Removal

Keyless Entry Module: Removal

  1. Remove negative battery cable.
  2. Remove left inner panel trim.
  3. Disconnect two electrical connectors. See Fig 1 .
  4. Drill out module rivets.
  5. Remove module.
Fig 1: Removing Remote Keyless Entry Module
G00107919Courtesy of GENERAL MOTORS CORP.
About FixVault