FixVault
Home › Oldsmobile › 1992 › Bravada 4.3 Z › Repair and Diagnosis › Body & Frame › Power Windows › Removal & Installation › Power Window Motor › Installation

Power Window Motor: Installation

  1. Install motor to the regulator.
  2. Install 3/16" (4.8 mm) rivets to motor and regulator, using Tool (J 20922-A). See SPECIAL TOOLS  .
  3. Remove nut and bolt used to lock the sector gear into position.
  4. Install regulator lift arm roller to the window mount sash.
  5. Connect wire harness to the motor.
  6. Install water deflector.
  7. Install armrest bracket.
  8. Install door trim panel.
  9. Connect negative (-) battery cable.
About FixVault