FixVault
Home › Oldsmobile › 1992 › Ninety-Eight Regency › Repair and Diagnosis › Body & Frame › Power Seats › System Tests › Test P: Seat Reclining Functions Operate For One Seat Only

Test P: Seat Reclining Functions Operate For One Seat Only

  1. Measure the voltage at the connected suspect Recliner Switch Connector.
  2. Check for battery voltage between Recliner Switch Connector terminal A (ORN/BLK) and ground. See WIRING DIAGRAMS  . If the voltage is not as specified, check/repair the ORN/BLK (60) wire.
  3. Check for battery voltage between Recliner Switch Connector terminals A (ORN/BLK) and E (BLK). If the voltage is not as specified, check/repair the BLK (151, 152 or 154) wires. See WIRING DIAGRAMS  .
  4. Check for battery voltage between Recliner Switch Connector terminals A (ORN/BLK) and B (BLK). If the voltage is not as specified, check/repair the BLK (151, 152 or 154) wires. See WIRING DIAGRAMS  .
  5. Move the Recliner Switch to FORWARD or RECLINE and hold. Check for battery voltage between Recliner Switch Connector terminals D (LT BLU) and C (LT GRN). See WIRING DIAGRAMS  . If the voltage is not as specified, check the wiring to the Recliner Motor for a short to ground. If wiring is okay, replace the Recliner Switch. See SEAT SWITCH  under REMOVAL & INSTALLATION.
  6. If all of the voltages are correct, check the wiring to the Recliner Motor. If wiring is okay, replace the Seat Recliner Motor. See PERMANENT MAGNET ELECTRIC MOTOR  under REMOVAL & INSTALLATION.
About FixVault