FixVault
Home › Oldsmobile › 1992 › Toronado Base › Repair and Diagnosis › Body & Frame › Power Windows › Removal & Installation › Window Regulator Motor › Removal

Window Regulator Motor: Removal

  1. Remove regulator. See WINDOW REGULATOR  .
  2. Drill a hole through the regulator sector gear and back plate and install a screw and nut to lock sector gear in position. Do not drill hole closer than 13 mm (1/2") to edge of sector gear or backplate. See Figure .
  3. Remove rivets holding motor to regulator using a 4.8 mm (3/16") drill bit.
About FixVault