FixVault
Home › Oldsmobile › 1993 › Bravada › Repair and Diagnosis › Body & Frame › Power Windows › Removal & Installation › Power Window Motor › Installation

Power Window Motor: Installation

NOTE: Upon installation, remove nut and bolt used to lock the sector gear in position.
  1. Install motor to the regulator (28).
  2. Install 4.8 mm (3/16 inch) rivets to the motor and regulator using Rivet Installer (J 20922-A). See SPECIAL TOOLS .
  3. Place regulator lift arm roller to the window mount sash (29).
  4. Connect wire harness to window motor.
  5. Install water deflector. See WATER DEFLECTOR .
  6. Install armrest bracket. See ARMREST .
  7. Install door trim panel. See TRIM PANEL .
  8. Connect negative battery cable.
About FixVault