FixVault
Home › Oldsmobile › 1993 › Bravada › Repair and Diagnosis › Body & Frame › Power Windows › Removal & Installation › Power Window Motor › Removal

Power Window Motor: Removal

  1. Raise window to closed position, and secure glass to door frame with cloth backed tape.
  2. Remove door trim panel. See TRIM PANEL .
  3. Remove armrest bracket.
  4. Remove water deflector. See WATER DEFLECTOR .
  5. Disconnect negative battery cable.
  6. Disconnect wire harness from motor.
  7. Remove regulator lift arm roller from the window mount sash (29). See Figure.
  8. Drill hole through the regulator sector gear and backplate, and install bolt and nut to lock sector gear in position. Drill out the motor mounting rivets. Remove motor from window regulator (28). See Figure.
About FixVault